Page 1 of 1 -
49 items total
Wide type enclosure for CO2 Monitor with LCD Display (Core, Battery, CO2, LCD Modules, and up to 3 tags).
Wide type, for units with Battery, Core, and Cover Module.
The USB Dongle is the main element of the BigClown radio network. This product works as a gateway for the BigClown nodes. It looks like a USB stick. You can plug it to your desktop, Raspberry Pi, or Turris Omnia. Also, you can look at it as an access point for up to 32 BigClown nodes.
Narrow type, for 3 small modules (e.g. Mini Battery, Core and Mini Cover Modules).
An easy start to making your IoT devices. With this kit, you’ll be able to build the Motion Detector and Climate Monitor projects. The kit also includes the USB Dongle that will create a gateway for the devices you build.
The Core Module is the key element of every BigClown node. It has a 32-bit ARM microcontroller with 192 kB of flash memory and 20 kB of RAM. Besides the integrated sub-GHz radio for the 868/915 MHz band, it also features a digital temperature sensor, 3D accelerometer, and security chip.
The Push Button Kit allows you to trigger actions or control various appliances remotely. It communicates wirelessly and operates up to 2 years from the standard Alkaline batteries. You can open your garage door, turn on the party lights, call your kids for dinner or just keep pushing it for the sake of fun…
Narrow type, for 4 small modules with Sigfox Module included (e.g. Sigfox, Mini Battery, Core and Mini Cover Modules).
The Climate Module integrates 4 environmental sensors - temperature, humidity, light intensity and atmospheric pressure. All sensors are digital, feature a low-power operating modes and they are connected using the I²C bus. It is a great product for environmental monitoring, weather stations, etc.
The Core Module - NR is a lite version of the Core Module without the radio module assembled. The rest is fully compatible with its ancestor. It has a 32-bit ARM microcontroller with 192 kB of flash memory and 20 kB of RAM. Also, it has an integrated digital temperature sensor, 3D accelerometer, and security chip.
A perfect start to making your IoT devices. With this kit, you’ll be able to build the Motion Detector, Climate Monitor, Flood Detector, LCD Thermostat and Smart LED Strip projects. The kit also includes the USB Dongle that will create a gateway for the devices you build.
Narrow type, for 5 small modules with Sigfox and Sensor modules included (e.g. Sigfox, Sensor, Mini Battery, Core and Mini Cover Modules).
The Motion Detector Kit makes it possible to detect human presence. It communicates wirelessly and operates up to 2 years from the standard Alkaline batteries. Using the digital, low-power, passive infrared technology (PIR), you will be able to build your own alarm or turn on the lighting automatically.
The Sigfox Module allows you to communicate to the Sigfox wireless network, a global network made for the IoT. This technology makes it possible to communicate from a battery-powered device directly to server, even for several years. The Sigfox Module uses radio frequency 868 MHz.
Become a real BigClown maker! With this kit, you’ll be able to build all BigClown projects including the CO2 Monitor. You will get a permanent 5% discount on all future orders. The kit also includes the USB Dongle that will create a gateway for the devices you build.
This bundle contains Sigfox Module and Subscription of MySigfox Platinum Service for 3 years. MySigfox is service provided by HARDWARIO.
The package is great for those who do not have a signed contract with the Sigfox network operator. MySigfox Service provides data transfer from Sigfox backend to your server (URL). With MySigfox Platinum Service your device can upload to your server up to 140 messages per day.
Originally: 2 327 Kč
533 Kč (–23 %)
Wide type, for 4 large modules (e.g. Battery, Core, CO2 and Cover Modules).
The Flood Detector Kit will let you know in case of a water leak accident in your bathroom or kitchen. Just place it on the floor in close proximity of a washing machine or dishwasher. It communicates wirelessly and operates up to 2 years from the standard Alkaline batteries. You will receive a push notification when the accident happens.
Wide type, for 5 large modules with Sigfox Module included (e.g. Sigfox, Battery, Core, CO2 and Cover Modules).
The CO2 Module is a gas sensor for measuring the carbon dioxide (CO₂) concentration. This module achieves ±50 ppm accuracy. It uses a non-dispersive infrared (NDIR) sensor manufactured in Sweden. Thanks to its low-power operation it can be powered from batteries for years.
The LCD Thermostat Kit allows you to control your heating in a really cool way. It communicates wirelessly and operates up to 2 years from the standard Alkaline batteries. You will be able to see the room temperature on a memory LCD and adjust the desired temperature (setpoint) with the pair of buttons.
Wide type, for units with Power, Core and Cover Module (Controller Kit).
The CO2 Monitor Kit allows you to measure quality of the air. It communicates wirelessly and operates up to 1 year from the standard Alkaline batteries. You will be able to measure carbon dioxide (CO₂), temperature, humidity, and atmospheric pressure. Keeping the carbon dioxide at optimum level has positive impact on our health.
The Mini Battery Module is designed as a power supply source for the battery-operated units. The integrated low-power boost converter provides an excellent efficiency from the two AAA 1.5 V Alkaline cells. It features a bottom-entry sockets, so the overall profile of the unit you build remains low.
Custom type enclosure for Flood Detector (Core, Sensor and Mini Battery Module and Flood Sensor LD-81).
The Battery Module is designed as a power supply source for the battery-operated units. The integrated low-power buck converter provides an excellent efficiency from the four AAA 1.5 V Alkaline cells. It also features an extra 5-pin socket where you can connect a BigClown tag.
The Power Controller Kit allows you to control appliances. You can use it to drive a digital LED strip or control an applicance using the integrated power relay (230V/16A). It has two pluggable terminals - one for a digital LED strip, second for an appliance driven by the relay. It communicates wirelessly and operates from a 5V AC/DC power adapter.
0.5 meter long digitally programmable RGBW LED Thermometer with 72 LEDs.
The Power Module allows you to connect a 5 V DC power adapter via a standard 2.1 mm power jack socket. It features a high-current relay (230 V AC / 16 A) to control your appliances. Also you can drive a digital LED strip with it (compatible with WS2812B).
The Button Module is as simple as its name speaks. It has one large button that feels good to click. You can use it to trigger various actions, e.g. turn on the light, send a push notification, or control an appliance. It is connected to the BOOT signal on the Core Module.
The PIR Module works as a motion detector operating on a passive infrared (PIR) principle. A typical usage of the PIR Module can be a wireless motion detector located on a wall or ceiling. The module is equipped with an ultra-low-power digital sensor from Excelitas’ the DigiPyro® family.
The LCD Module uses a unique technology - the so-called memory display developed by Sharp. It provides a resolution of 128 x 128 pixels in 1.28 inch size. It implements an ultra-low-power display controller, so you can have active graphical display with a long service time from batteries.
The Sensor Module features two universal inputs on a pluggable terminal block. The terminals can be used as both analog and digital input/output. For example you can connect various external digital, analog or resistive sensors. Also, you can communicate with other devices on a 1-Wire bus.
The Relay Module is suitable for switching small power appliances - e.g. LED strip, cooling fan, siren, buzzer, garage door opener, etc. It features a bistable (or latching) relay and that makes it suitable for battery-operated applications - the relay simply remembers its state.
The Encoder Module can be useful for controlling your applications. The module is equipped with a high-quality rotary encoder manufactured by Bourns and features high reliability and durability. The rotary encoder is also equipped with a push-button switch.
The 1-Wire Module allow you to connect I²C devices over a distance of several meters. The I²C protocol is encapsulated to a 1-Wire protocol. The data are protected using 16-bit CRC. You can use the Sensor Module to create a 1-Wire bus master.
The Tag Module makes it possible to connect up to six BigClow tags. There are two independent I²C buses (I2C0 and I2C1) - one on each side. This allows to connect two tags of the same I²C address to a single BigClown node. It also features pull-up resistors on SDA/SCL signals of I2C1 bus.
The Temperature Tag uses a high-accuracy temperature sensor TMP112 with a typical accuracy of ±0.1 °C at 25 °C. This sensor is digital and calibrated. It communicates using an I²C bus and features a very low power operation and shutdown mode.
The Humidity Tag uses a high-accuracy humidity sensor SHT20 with a typical accuracy of ±3 % from 20 % to 80 %. This sensor is digital and calibrated. It communicates using an I²C bus and features a very low power operation and shutdown mode.
The Lux Meter Tag uses a high dynamic range light intensity sensor OPT3001 that can measure illuminance from 0.01 to 83,000 lux. This sensor is digital and calibrated. It communicates using an I²C bus and features a very low power operation and shutdown mode.
The Barometer Tag allows you to measure absolute pressure in the range from 20 kPa to 110 kPa, or altitude above the sea level in meters. It uses a low-power I²C sensor MPL3115A2 with an absolute accuracy of ±0.4 kPa. It features a very low active and standby current.
The NFC Tag operates as a dual port memory. You have the the NFC protocol from one side and the I²C bus interface from the other side. It features a 1 kB EEPROM memory. The chip does not have to be powered when being accessed from the NFC side.
The Mini Cover Module is a simple mechanical part that helps to cover the front face of the BigClown electronics (smaller format 33 x 55 mm). It looks great when combined with one of our 3D-printed enclosure. You simple snap it in the BigClown socket header using the bottom pins.
The Cover Module is a simple mechanical part that helps to cover the front face of the BigClown electronics (larger format 88 x 55 mm). It looks great when combined with one of our 3D-printed enclosure. You simple snap it in the BigClown socket header using the bottom pins.
The Base Module works as a mechanical stand for the BigClown units. With the exception of the Battery Module, you can plug any other BigClown module into a standardized socket available on the Base Module. It also features a prototyping area for soldering your own circuits.
The Breadboard Module offers an easy way to connect any BigClown module to your breadboard. The narrowed breakout provides more space for wiring and prototyping. The precision pin headers from the bottom side allow smooth insertion to your breadboard and do not stress the breadboard’s sockets.
The Probe Module allows you to easily hook up an oscilloscope or logic analyzer on any signal of the BigClown header. Sometimes during the development you need to analyze the signals and see what’s going on. And this module makes the task fast and convenient.
Cloony is compact version of the Core Module. The size is 23 x 23 mm. It has a 32-bit ARM microcontroller with 192 kB of flash memory and 20 kB of RAM. Besides the integrated sub-GHz radio for the 868/915 MHz band, it also features a digital temperature sensor, and security chip.
Page 1 of 1 -
49 items total