Modules & Tags

 

Bestsellers

78
465178465
Brands

Page 1 of 1 - 31 items total

  • usb dongle C Code: BCW001
    In stock

    The USB Dongle is the main element of the BigClown radio network. This product works as a gateway for the BigClown nodes. It looks like a USB stick. You can plug it to your desktop, Raspberry Pi, or Turris Omnia. Also, you can look at it as an access point for up to 32 BigClown nodes.

    516 Kč excl. VAT 624 Kč
  • core module r2 a Code: BCM001
    In stock

    The Core Module is the key element of every BigClown node. It has a 32-bit ARM microcontroller with 192 kB of flash memory and 20 kB of RAM. Besides the integrated sub-GHz radio for the 868/915 MHz band, it also features a digital temperature sensor, 3D accelerometer, and security chip.

    623 Kč excl. VAT 754 Kč
  • core module r2 nr a Code: BCM002
    In stock

    The Core Module - NR is a lite version of the Core Module without the radio module assembled. The rest is fully compatible with its ancestor. It has a 32-bit ARM microcontroller with 192 kB of flash memory and 20 kB of RAM. Also, it has an integrated digital temperature sensor, 3D accelerometer, and security chip.

    408 Kč excl. VAT 494 Kč
  • module mini battery C Code: BCM016
    In stock

    The Mini Battery Module is designed as a power supply source for the battery-operated units. The integrated low-power boost converter provides an excellent efficiency from the two AAA 1.5 V Alkaline cells. It features a bottom-entry sockets, so the overall profile of the unit you build remains low.

    236 Kč excl. VAT 286 Kč
  • module battery A Code: BCM004
    In stock

    The Battery Module is designed as a power supply source for the battery-operated units. The integrated low-power buck converter provides an excellent efficiency from the four AAA 1.5 V Alkaline cells. It also features an extra 5-pin socket where you can connect a BigClown tag.

    301 Kč excl. VAT 364 Kč
  • module power B Code: BCM015
    In stock

    The Power Module allows you to connect a 5 V DC power adapter via a standard 2.1 mm power jack socket. It features a high-current relay (230 V AC / 16 A) to control your appliances. Also you can drive a digital LED strip with it (compatible with WS2812B).

    408 Kč excl. VAT 494 Kč
  • module pir A Code: BCM009
    In stock

    The PIR Module works as a motion detector operating on a passive infrared (PIR) principle. A typical usage of the PIR Module can be a wireless motion detector located on a wall or ceiling. The module is equipped with an ultra-low-power digital sensor from Excelitas’ the DigiPyro® family.

    387 Kč excl. VAT 468 Kč
  • module climate A Code: BCM017
    In stock

    The Climate Module integrates 4 environmental sensors - temperature, humidity, light intensity and atmospheric pressure. All sensors are digital, feature a low-power operating modes and they are connected using the I²C bus. It is a great product for environmental monitoring, weather stations, etc.

    408 Kč excl. VAT 494 Kč
  • module lcd bg A Code: BCM007
    In stock

    The LCD Module uses a unique technology - the so-called memory display developed by Sharp. It provides a resolution of 128 x 128 pixels in 1.28 inch size. It implements an ultra-low-power display controller, so you can have active graphical display with a long service time from batteries.

    838 Kč excl. VAT 1 014 Kč
  • module button A Code: BCM027
    In stock

    The Button Module is as simple as its name speaks. It has one large button that feels good to click. You can use it to trigger various actions, e.g. turn on the light, send a push notification, or control an appliance. It is connected to the BOOT signal on the Core Module.

    279 Kč excl. VAT 338 Kč
  • Modules 382x324 MiniCover Code: BCM025
    In stock

    The Mini Cover Module is a simple mechanical part that helps to cover the front face of the BigClown electronics (smaller format 33 x 55 mm). It looks great when combined with one of our 3D-printed enclosure. You simple snap it in the BigClown socket header using the bottom pins.

    64 Kč excl. VAT 78 Kč
  • module cover A Code: BCM024
    In stock

    The Cover Module is a simple mechanical part that helps to cover the front face of the BigClown electronics (larger format 88 x 55 mm). It looks great when combined with one of our 3D-printed enclosure. You simple snap it in the BigClown socket header using the bottom pins.

    86 Kč excl. VAT 104 Kč
  • module co2 A Code: BCM008
    In stock

    The CO2 Module is a gas sensor for measuring the carbon dioxide (CO₂) concentration. This module achieves ±50 ppm accuracy. It uses a non-dispersive infrared (NDIR) sensor manufactured in Sweden. Thanks to its low-power operation it can be powered from batteries for years.

    1 912 Kč excl. VAT 2 314 Kč
  • module sig fox A Code: BCM019
    In stock

    The Sigfox Module allows you to communicate to the Sigfox wireless network, a global network made for the IoT. This technology makes it possible to communicate from a battery-powered device directly to server, even for several years. The Sigfox Module uses radio frequency 868 MHz.

    408 Kč excl. VAT 494 Kč
  • module sig fox A Code: BCM028
    In stock

    This bundle contains Sigfox Module and Subscription of MySigfox Platinum Service for 3 years. MySigfox is service provided by HARDWARIO.

    The package is great for those who do not have a signed contract with the Sigfox network operator. MySigfox Service provides data transfer from Sigfox backend to your server (URL). With MySigfox Platinum Service your device can upload to your server up to 140 messages per day.

    Originally: 2 327 Kč
    You save: 533 Kč (–23 %)

    1 483 Kč excl. VAT 1 794 Kč
  • module sensor BA Code: BCM020
    In stock

    The Sensor Module features two universal inputs or outputs on a pluggable terminal block with 1-Wire bus master support. The terminals can be used as both analog and digital input/output. For example you can connect various external digital, analog or resistive sensors. Also, you can communicate with other devices on a 1-Wire bus.

    193 Kč excl. VAT 234 Kč
  • module 1 wire A Code: BCM026
    In stock

    The 1-Wire Slave Module allow you to connect I²C devices over a distance of several meters. The I²C protocol is encapsulated to a 1-Wire protocol. The data are protected using 16-bit CRC. You can use the Sensor Module to create a 1-Wire bus master.

    236 Kč excl. VAT 286 Kč
  • LoRa Module Code: BCM023
    Pre-Order

    The LoRa Module allows you to communicate to the LoRaWAN wireless network, a network made for the IoT. This technology makes it possible to communicate from a battery-powered device directly to server, even for several years. The LoRa Module uses radio frequency 868 MHz.

    623 Kč excl. VAT 754 Kč
  • module tag A Code: BCM003
    In stock

    The Tag Module makes it possible to connect up to six BigClow tags. There are two independent I²C buses (I2C0 and I2C1) - one on each side. This allows to connect two tags of the same I²C address to a single BigClown node. It also features pull-up resistors on SDA/SCL signals of I2C1 bus.

    172 Kč excl. VAT 208 Kč
  • module encoder A Code: BCM018
    In stock

    The Encoder Module can be useful for controlling your applications. The module is equipped with a high-quality rotary encoder manufactured by Bourns and features high reliability and durability. The rotary encoder is also equipped with a push-button switch.

    193 Kč excl. VAT 234 Kč
  • module relay B Code: BCM011
    In stock

    The Relay Module is suitable for switching small power appliances - e.g. LED strip, cooling fan, siren, buzzer, garage door opener, etc. It features a bistable (or latching) relay and that makes it suitable for battery-operated applications - the relay simply remembers its state.

    301 Kč excl. VAT 364 Kč
  • module base A Code: BCM014
    In stock

    The Base Module works as a mechanical stand for the BigClown units. With the exception of the Battery Module, you can plug any other BigClown module into a standardized socket available on the Base Module. It also features a prototyping area for soldering your own circuits.

    107 Kč excl. VAT 130 Kč
  • module breadboard A Code: BCM012
    In stock

    The Breadboard Module offers an easy way to connect any BigClown module to your breadboard. The narrowed breakout provides more space for wiring and prototyping. The precision pin headers from the bottom side allow smooth insertion to your breadboard and do not stress the breadboard’s sockets.

    193 Kč excl. VAT 234 Kč
  • module probe A Code: BCM013
    In stock

    The Probe Module allows you to easily hook up an oscilloscope or logic analyzer on any signal of the BigClown header. Sometimes during the development you need to analyze the signals and see what’s going on. And this module makes the task fast and convenient.

    408 Kč excl. VAT 494 Kč
  • tag humidity A Code: BCT002
    In stock

    The Humidity Tag uses a high-accuracy humidity sensor SHT20 with a typical accuracy of ±3 % from 20 % to 80 %. This sensor is digital and calibrated. It communicates using an I²C bus and features a very low power operation and shutdown mode.

    193 Kč excl. VAT 234 Kč
  • voc tag Code: BCT008
    Sold out

    The VOC Tag is a gas sensor for measuring volatile organic compounds (VOC) concentration. This is useful for indoor air quality monitoring applications. This module uses a metal-oxide multi pixel sensor SGP30 from Sensirion measuring total VOC level.

    Originally: 490 Kč
    You save: 25 Kč (–5 %)

    384 Kč excl. VAT 465 Kč
  • tag temperature A Code: BCT005
    In stock

    The Temperature Tag uses a high-accuracy temperature sensor TMP112 with a typical accuracy of ±0.1 °C at 25 °C. This sensor is digital and calibrated. It communicates using an I²C bus and features a very low power operation and shutdown mode.

    107 Kč excl. VAT 130 Kč
  • lux meter tag a1 Code: BCT004
    In stock

    The Lux Meter Tag uses a high dynamic range light intensity sensor OPT3001 that can measure illuminance from 0.01 to 83,000 lux. This sensor is digital and calibrated. It communicates using an I²C bus and features a very low power operation and shutdown mode.

    107 Kč excl. VAT 130 Kč
  • tag barometer A Code: BCT003
    In stock

    The Barometer Tag allows you to measure absolute pressure in the range from 20 kPa to 110 kPa, or altitude above the sea level in meters. It uses a low-power I²C sensor MPL3115A2 with an absolute accuracy of ±0.4 kPa. It features a very low active and standby current.

    193 Kč excl. VAT 234 Kč
  • NFC Tag Code: BCT001
    In stock

    The NFC Tag operates as a dual port memory. You have the the NFC protocol from one side and the I²C bus interface from the other side. It features a 1 kB EEPROM memory. The chip does not have to be powered when being accessed from the NFC side.

    193 Kč excl. VAT 234 Kč
  • cloony A Code: BCM005
    Pre-Order

    Cloony is compact version of the Core Module. The size is 23 x 23 mm. It has a 32-bit ARM microcontroller with 192 kB of flash memory and 20 kB of RAM. Besides the integrated sub-GHz radio for the 868/915 MHz band, it also features a digital temperature sensor, and security chip.

    408 Kč excl. VAT 494 Kč

Page 1 of 1 - 31 items total